How to Replace an Electric Cooktop

Are you want to know how to replace an electric cooktop? Then you are right place. If your cooktop is old and you are thinking to replace it. Then it might be the best time to replace your older cooktop.  And a new electric cooktop can give your kitchen a mind-blowing and fresh look. This is a relatively easy process and it needs just a few hours to complete the action. Whether it is because they are no longer working properly.

 

Because you want to upgrade to a newer model, replacing an electric cooktop is not a difficult task.  If you have never replaced a cooktop, probably you want to know the whole process and how to start. In this article, we are going to share with you the three simple methods that’ll help you for replacing the new cooktop.

 

The first thing to know about replacing an electric cooktop is that it is not a difficult task. In fact, it is something that can be done in just a few simple steps. Follow the three steps and apply them very carefully and then you’ll be able to replace the cooktop.

 

Step 1: Before an Electric Cooktop Replacing

 

When you start replacing and that time you have to know some individual matter. Such as, you’ll need some important materials like a screwdriver, junction box, different types of knives, clamping brackets, etc. The most significant tools are a measurement scale and light.

 

After you have all materials and supplies then the first thing is to start measuring your new cooktop for a replacement that will fit on the countertop. If you have an old cooktop then you remove it very carefully. You should clean your countertop’s surface area.

 

Carefully remove the screws that hold it in place, and then lift the cooktop off of the counter. The next action is to disconnect the gas line if you have. Also, you have to disconnect the power supply from your old cooktop. Once you disconnect the old cooktop then you can easily remove it from the counter.

 

Check your junction box for the exact location where you’ll need this. If the junction box has no right place then you should install a junction box for the appropriate location. Make sure that your box has a maximum of 240V. Because most of the time and a huge number of cooktops require this voltage. For the reason that generally a cooktop has 2 fuses and they’re very powerful.

 

You should see the area which is totally free and has no noise. You can create or art a plan for replacement. And it will be very helpful for you because you don’t have to suffer for anything you need. Yes, you are ready to go to the next following step.

 

 

Step 2: Right and Easy Method for Replacing an Electric Cooktop

 

Once you have done the previous action then it is the main time to replace it. So, first of all, you have to measure the dimensions of your new cooktop.

 

Your cooktops measurements will be lengthwise and widthwise.  After measurement, you may need to use a putty knife to loosen the cooktop from the countertop. And you can use a drill machine for making the hole.  If the countertop is made of granite you’ll need a wet saw for cutting this. Clean your counter thoroughly and carefully.

 

Keep small items on the cooktop well-placed so that they are easily accessible when setting up. Then you can attach the clamping brackets as many as needed. This helped the cooktop on the counter.

 

Then you are ready to set up the new cooktop. Press down until it clicks into place with the clamping breaks. And you have to set it very carefully with the countertops. Then Install a standard wall mount metal junction box if you already have everything in place.

 

Once the cooktop is unbound, carefully lift it out of the opening. Then, you can reverse the process how to replace an electric cooktop. Be sure to connect the power supply before you screw the cooktop into place. Each pair of wires must be connected very smoothly. Be sure to maintain the correct color order for the wires. This is the easiest way and is said to be done with caution. Since it’s one of the electric cooktops.

 

 

Step 3:  After Replacing the Cooktop and How to start it?

 

First of all, you need to restore the power for testing your new cooktop. The first thing you need to do is make sure that is the cooktop properly plugged in. Once you are done plugging in your cooktop then you need to turn on your circuit breaker. And then you can turn on the cooktop by pressing the “on” switch.

 

If the cooktop doesn’t turn on, you may need to reset it. You can easily reset your cooktop. If you press the button “reset” then automatically reset it. And then you can start cooking on the cooktop. Finally, you can control your cooktop by customizing the heat. One thing you could access the whole system.

 

Conclusion & Overview

 

In conclusion, this article has provided a step-by-step guide on how to replace an electric cooktop. First, disconnect the power to the cooktop. Next, remove the old cooktop if you have then unscrew the screws that hold it in place. Be mindful so as not to squeeze or harm the wire as you eliminate the old cooktop. Next, you can easily install the new cooktop by following the three steps that come with it.

 

At last, reconnect the power supply and test the new cooktop to ensure it is working appropriately exactly. So when you apply this instruction, you have to maintain the rules and think about the safety issue. Thanks for reading.